Safety Online

What Mistakes Do People Make When Concrete Core Drilling In Brisbane?

When it comes to concrete core drilling, people find themselves making several mistakes that could endanger your safety, the safety of others and cause property damage.  Due to this reason, it is important for you to ensure that you are thoroughly prepared before you begin drilling concrete. One of the ways you can prepare yourself is by being aware of the mistakes that people make in such projects so that you can avoid making these mistakes.  For this reason, if you want to learn about the mistakes that people commonly make during concrete core drilling in Brisbane, keep reading this article.


Mistakes People Make During Concrete Core Drilling In Brisbane

The following mistakes are common during concrete core drilling in Brisbane;

  • Assuming that all concrete is similar

This is one of the mistakes people make when it comes to concrete core drilling in Brisbane.  It is essential for you to note that concrete consists of various additives which affect its density, strength and other qualities.  When you treat concrete the same, you might use the wrong tools when you are concrete core drilling. Instead, you should make sure that you note the difference in the concrete so that you can use the appropriate tool when drilling concrete.

  • Not having clarity on what lies beneath the concrete you are drilling

This mistake can be very dangerous since it affects your safety and the safety of the other people around the site.  Before you start with the concrete core drilling task, it is essential for you to ensure that you know what lies beneath the concrete so that you do not drill blindly. In case you do not screen the concrete, you might find yourself drilling through pipes or wires leading to serious accidents.

  • Drilling too fast

When you are drilling concrete, here is a certain spending that you are recommended to drill at.  However, you can decrease the speed at which you are drilling if the abrasiveness and hardness of the concrete is increasing.  Unfortunately, there are people who drill too fast past the recommended speed which hinders the drill from working properly.

  • Failing to use adequate lubrication or using the wrong lubrication

When it comes to concrete core drilling, oil-based lubricants are not recommended since corrosion and heat can make the lubricant break down.   Instead of using these lubricants, you should use water. However, most people use oil-based lubricants which are wrong.

Also, when it comes to the water that you are using for lubrication, you have to ensure that you do not use less water like most people do.  If you fail to use adequate water, you may make the drill get too warm, which can lead to its damages. Overheating can also lead to heat fractures which lead to the damage of concrete.  Therefore, make sure that you use enough water to prevent such damages.

  • Applying too much pressure

Another mistake that people make is applying too much pressure when they are drilling concrete. When you do this, you will not take less time to get through the concrete and also, you will cause damage to the drill bits and eat fractures to the concrete.  Just like the concrete core drilling speed, the pressure is another thing you need to mind about.


In case you think that you are likely to make any of these mistakes, you should consider getting the help of professionals who are specialised concrete core drilling.  Luckily, you can always get a good concrete core drilling company in Brisbane to help you with the tasks ahead. When you are working with a professional, you do not have to worry about these mistakes since they are experts in the field.



Leave a Reply

Your email address will not be published. Required fields are marked *